Blizzard-lighting Weather System COB Manual de usuario descargar pdf (Pagina 12)

Page 12

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

Set the DMX Starting Address

1.) The default mode for the xture is DMX, which appears as d001 on the LED

readout. To select a different DMX address, hit the <SETUP> button and use

the <UP/DOWN> buttons to select the your desired starting DMX address

ranging from d001 - d512 then hit <SETUP> again to conrm your choice.

DMX Channel Mode

1.) To change the DMX channel mode, use the <MODE> button to scroll to

d001 and hit the <SETUP> button. Push the <SETUP> button again and use

the <UP/DOWN> buttons to scroll through your choices of 2-ch, 3-ch, 4-ch,

7-ch, 8-ch, 14ch or 15ch. Press <MODE> to conrm your choice.

Slave Mode

1.) To use as a slave unit, simply use the <MODE> button to scroll to SLAu.

This Weather System™ COB will now be in slave mode and follow the master

unit, which is the 1st Weather System™ COB in the DMX chain.

Static Colors, Auto Mode, & Sound Active Modes:

Allows a single or Master/Slaved units to run factory installed programs at user selectable

speeds.

Static Colors

1.) To use one of the 7 built-in static colors (8 is off), use the <MODE> button

to scroll to Pr-1, and hit <SETUP>. Use the <UP/DOWN> buttons to scroll

through the static color choices:

1 --r (red) 2 -r9 (yellow) 3 --9 (green) 4 -9b (teal)

5 --b (blue) 6 -rb (magenta) 7 r9b (white) 80FF (off)

2.) Push the <SETUP> button to conrm your choice. Now you can adjust the

strobe speed by selecting the strobe speed adjustment settings of FS01 - FS99

(slow <--> fast).

Built-in Programs

1.) To set the xture to run a single built-in program, use the <MODE> button

to scroll to Pr--, and press the <SETUP> button. Then use the <UP/DOWN>

buttons to scroll through the built-in program choices of Pr02-Pr14 and push

the <SETUP> button to conrm your choice. Now you can adjust the speed

of the program by using the <UP/DOWN> buttons and choose from SP01 -

SPFL (slow <--> fast), and push the <SETUP> button. To conclude setup, you

now have the option to adjust the strobe speed of the program by selecting the

strobe adjustment settings of FS01 - FS99 (slow <--> fast).

Auto Mode

1.) To set the xture to run in auto mode, use the <MODE> button to scroll to

AUTO, and hit <SETUP>. You can now adjust the speed by using the <UP/

DOWN> buttons and choose from SP01 - SPFL (slow <--> fast). To conrm

your choice press the <SETUP> button You can now adjust the strobe speed by

selecting the strobe adjustment settings of FS01 - FS99 (slow <--> fast).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

Blizzard-lighting Weather System COB Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Blizzard-lighting Weather System COB