Blizzard-lighting Vari White ProPar (Rev A) Manual de usuario descargar pdf (Pagina 10)

Page 10

NOTE: Fixtures in slave mode will display “STBY“ (Standby). This is NORMAL.

Return the xture to master mode to use it as a standalone xture.

To set a custom color in Master/Slave/Standalone Mode:

Using this function, you can select any shade of white by adjusting the White and Warm

White values from 0-255 and also apply a strobe effect.

Please note that modifying the values in this step will affect ALL modes, therefore

we recommend resetting all levels to their highest value (255) after using this

mode.

To enter color mode, select

STAT from the menu panel and then hit the <ENTER> but-

ton.Youcanthenadjustthefollowing:

Cool White Level

A.000 then 000 - 255, <ENTER>.

Warm White Level

b.000 then 000 - 255, <ENTER>.

Strobe Speed

ST.00 then 000 - 020, <ENTER>.

Temperature Functions:

Allows you to set a temperature protection cutoff (default is 85 degrees Celsius), and dis-

plays the current xture temperature.

To enter the temperature functions, select

TEMP from the menu panel and then hit the

<ENTER>button.Youcanthenadjustthefollowing:

Currenttemperature:

CURR <ENTER>

Setmaxtemperature:

TOP <ENTER> <UP/DOWN/ENTER>.

LED Control Panel Screen Saver:

1.) The LED control panel menu will automatically shut off after 30 seconds of

inactivity. Press and release any button to turn the display back on.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Blizzard-lighting Vari White ProPar (Rev A) Manual de usuario Pagina 10