Blizzard-lighting Reanimator Manual de usuario descargar pdf (Pagina 8)

Page 8

4. OPERATING ADJUSTMENTS

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.) Press the <MENU> button until you reach DMX mode, which appears as

A001 on the LED Readout. Use the <ENTER> button then the <UP> and

<DOWN> buttons to choose a channel between

1 and 512. Press <ENTER>

again to conﬁ rm.

Master/Slave Mode (Auto/Sound Active):

Allows you to link up to 32 units together without a controller.

1.) Use standard DMX cables to daisy chain your units together via the DMX con-

nector on the rear of the units. It may be necessary to use a terminator at the

last ﬁ xture. For more information about terminators, see page 8.

2.) Choose a unit to function as the Master. Select from one of the run modes,

RUN1-RUNF or sound activation. The master unit must be the ﬁ rst unit. Finally,

chain the units together using DMX cable.

Master

RUN1-F then <ENTER> to conﬁ rm.

3.) Select slave function by using the <UP>/<DOWN> keys to reach A001 in

the menu on the slave units, and they will react in the same as the Master.

Slave

A001 then <ENTER> to conﬁ rm.

4.) On the master ﬁ xture, use the <UP>/<DOWN>/<MENU> keys to reach

RUN1-F/Soud, which allows you to select the Master/Slave mode.

Sound active

SoUd then <ENTER> to conﬁ rm.

Auto mode

RUN1-F then <ENTER> to conﬁ rm.

Pattern Playback Adjustments:

Allows you to adjust the playback characteristics of the automatic programs.

Run1 - Run F then <ENTER> to conﬁ rm.

Each program is different. Perhaps you should study them in depth and write a

short treatise on the differences. Otherwise, just enjoy them all!

L001-L255 then <ENTER> to conﬁ rm.

Adjusts the number of patterns to display

F001-F255 then <ENTER> to conﬁ rm.

Adjusts the number of frames to display of each animation

P000-P255 then <ENTER> to conﬁ rm.

Animation speed (Slow <--> Fast)

LEon = LED Control Panel remains on

LoFF = LED Control Panel shuts off after approximately 30 seconds.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Blizzard-lighting Reanimator Manual de usuario Pagina 8