Blizzard-lighting Polaris LED Spot(Rev A) Manual de usuario descargar pdf (Pagina 6)

Page 11

Control Panel Menu Structure

Main Function Sub Function Selection What It Does...

1 - Intro

1.1 Address 000 <-> 255 Sets the DMX address

1.2 Reset Yes <-> No Resets the ﬁ xture

1.3 Operation

DMX-512 Sets the ﬁ xture to DMX mode

Auto_1 Sets the ﬁ xture to hanging auto mode

Auto_2 Sets the ﬁ xture to ﬂ oor standing auto mode

Sound_1 Sets the ﬁ xture to hanging sound mode

Sound_2 Sets the ﬁ xture to ﬂ oor standing sound mode

Custom Sets the ﬁ xture to run the user program

Test Sets the ﬁ xture to run a standard test program

Slave Sets the ﬁ xture to respond to a “Master” unit.

1.4 Channels Advanced 8-Bit pan/tilt operation

Basic 16-But pan/tilt operation

1.5 Display 60 close Turns the display backlight off after 60 seconds

Bright Sets the display backlight to remain on

1.6 Info Edition Shows the software version

2 - Invert

2.1 Pan

Normal Sets the Pan operation: 0-530 degrees

Reverse Sets the Pan operation: 530-0 degrees

2.2 Tilt

Normal Sets the Tilt operation: 0-270 degrees

Reverse Sets the Tilt operation: 270-0 degrees

2.3 Color

Step Sets the color wheel to lock to colors

Linear Sets the color wheel to allow split colors

2.4 Use No <-> Yes Enables/disables all of the invert functions

3 - Range

3.1 P/start 000 <-> 255 Sets the pan start range

3.2 P/ﬁ nish 000 <-> 255 Sets the pan end range

3.3 T/start 000 <-> 255 Sets the tilt start range

3.4 T/ﬁ nish 000 <-> 255 Sets the tilt end range

3.5 Use No <-> Yes Enables/disables all of the range functions

4 - Special

4.1 Black No <-> Yes Allows the move-in-black mode to save in DMX

4.2 Reset

DMX Allows the DMX remote reset command

System Prevents the remote reset command

5 - Edit

5.1 Step 000 <-> 255 Selects the step to edit

5.2 Pan

000 <-> 255

Uses the 9 different attributes of the ﬁ xture to

create a custom program.

5.3 Tilt

5.4 X/Y Speed

5.5 Color

5.6 Gobo

5.7 Gobo Rotation

5.8 Prism

5.9 Dimmer

5.10 Strobe

5.11 Time 000 <-> 255 Sets the duration of each step

5.12 Use No <-> Yes Enables/disables the custom program

6 - Default 6.1 Default No <-> Yes Sets the ﬁ xture to factory defaults

Page 12

Additional User Adjustments

Service Functions

To test the ﬁ xture:

1) Use the “Test” function under the “1.3 Operation” menu (see page 11).

To reset the ﬁ xture:

1) Use the “4.2 Reset” function under the “4-Special” menu (see page 11).

To restore all settings to their factory defaults:

1) Use the “6.1 Default” function under the “6-Default” menu (see page 11).

Operation

Master/Slave Mode (Master Sound, Master Auto):

This mode will allow you to link up to 32 units together without a controller.

1) Use standard DMX cables to daisy chain your units together via the DMX connector on

the rear of the units. For longer cable runs we suggest a terminator at the last ﬁ xture.

2) Choose a unit to function as the Master. Turn dipswitches to the Master position on the

unit. The unit must be the ﬁ rst unit in line. Then simply chain the units together using DMX

cable.

Note: The master unit must be in one of the Auto or Sound modes. See the Menu Map for

setting the options in the menu and navigating the Control Board.

3) Adjust the “Operation” to “Slave” on the slave units, and they will react the same as the

Master unit.

Note: if you would like to have the ﬁ xtures inverted, this can be set in the Control board.

DMX Mode

This mode allows the unit to be controlled by any universal DMX controller. If you are unfa-

miliar with DMX, please read the DMX Primer section.

1) Set the “Operation” to “DMX512”.

2) Set your DMX starting address.

DMX Channel Values

The Polaris™ has 2 DMX channel proﬁ les (operation modes). These can be accessed in the

Control Board.

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Blizzard-lighting Polaris LED Spot(Rev A) Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Blizzard-lighting Polaris LED Spot(Rev A)